 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Embedded Power for Business-Critical Continuity Quarter-Brick Series 2nd Generation IBC Total Power: 336 - 450W Input Voltage: 36 - 75 Vdc Rev.06.06.08 qb2gibc 1 of 4 Electrical Specifications Special Features * 48V input with isolated 12 V output * Ultra-high efficiency, 95.5% 12 V @ 37.5 A * High power density (337 W/in3) open-frame technology * Wide operating ambient temperature range * Industry standard quarter-brick footprint and pinout * Low profile, 0.40 " (10.2 mm) * Meets basic insulation requirements of EN60950-1 * Remote ON/OFF and overtemperature protection * Available RoHS compliant * 2 Year Warranty Output Output setpoint accuracy Line regulation: Load regulation Total error band (including setpoint, line, load and temperature) Minimum load Overshoot Undershoot Ripple and noise 5 - 20 MHz Low line to high line Full load to min. load IBC38AQT4812J IBC30AQS4812J IBC28AQW4812J At turn on and turn-off (See note 2) See table See table See table 9.70 - 13.40 Vdc 11.52 - 12.48 Vdc 11.40 - 12.60 Vdc 0A None None 100 mV pk-pk typ. 40 mV rms typ. See table Remote OFF (See note 1) (See note 4) 6 mA typ. 12 A max. @ lo max. and Vin = min. rated 1000 - 1560 mA (pk-pk) Open collector ref. to- input >2.4 Vdc <0.4 Vdc 40 V 38 V 35.2 V 34 V 15 ms 5 ms Input Input voltage range Input current Input current (max.) Input reflected ripple Safety UL/cUL : CAN/CSA 22.2 No. 60950-1 UL60950-File No. E135734 VDE File No. 10401-3336-0206 Licence No. 40012752 Remote ON/Off (See note 6) Logic compatiblity On OFF Undervoltage lockout (non-latching): Power-up IBC38AQT4812J and Power-down IBC30AQS4812J Power up IBC28AQW4812J Power down Startup time (see note 3) Power-up Remote ON/OFF Embedded Power for Business-Critical Continuity All specifications are typical at nominal input, full load at 25 C unless otherwise stated. EMC Charateristics Immunity: ESD air enclosure EN61000-4-2 8 kV, 6 kV Radiated field enclosure EN61000-4-3 10 V/m Conducted (DC power) EN61000-4-6 10 V Input transients 60 V to 100 V. 100 ms (O/P within spec.) (O/P within spec.) (O/P within spec.) Rev.06.06.08 qb2gibc 2 of 4 General Specifications Efficiency Basic insulation Switching frequency Approvals and standards (see note 5) Material flammability Weight MTBF Representative model: Input/output Fixed See table 2250 Vdc 400 kHz typ. EN60950-1 VDE UL/cUL60950-1 UL94V-0 49 g (1.73 oz) 5,500,000 hours Environmental Specifications Thermal Operating ambient, -40 C to +85 C performance temperature Non-operating -55 C to +125 C Protection Short-circuit Overvoltage (See note 9) Thermal Hiccup Non-latching 125 C hot spot Telcordia Tech SR-332 48 Vin, 40 C, 50% load ground benign Ordering Information Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typ.) Regulation2 Set Point Accuracy % Line % Load Model Number 450 W 360 W 336 W 42 - 53 Vdc 42 - 53 Vdc 36 - 75 Vdc 12 V 12 V 12 V 0A 0A 0A 37.5 A (7) 30 A 28 A 95.5% 94.5% 94.5% --0.25% 0.25% +10, -12.5% 0.3% 1.0% 1.5% 1.5% 1.5% IBC38AQT4812J IBC30AQS4812J IBC28AQW4812J CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. Part Number System with Options Product Family Rated Output Current Form Factor Input Voltage Type Input Voltage Output Voltage Remote ON/OFF Logic Package, Body Height Pin Length Options RoHS Compliance (7, 8) IBC IBC =2nd Generation IBC 30A 30 A = 30 Amps etc. Q Q = Quarterbrick S T = Narrow Input Fixed Ratio S = Narrow Input Semi-reguated W = Wide Telecom Semi-reguated 48 48 = 48 V 12 12 = 12 V - R Blank = Positive R = Negative (See Note 6) A A = Open-frame 0.40 in (10.2 mm) E = Open-rame, 0.45 in (11.4 mm) N Blank = 0.188 " (4.78 mm) N = 0.145 " (3.68 mm) K = 0.110 " (2.79 mm) J J = Pb-free (RoHS 6/6 compliant) Notes 1. Recommended input fusing is a 20 A HRC 200 V rated fuse. 2. Maximum is model dependent, Measured with external filter. See Application Note 190 for details. 3. Start-up into resistive load. 4. Maximum is model dependent, measured without external Pi filter. Significant reduction is possible with external filter. See Application Note 190 for details. 5. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6. Negative remote ON/OFF option is available. Please add the suffix `-R' to the part number, e.g. IBC30AQS4812-RAJ. 7. Output is rated at 450W constant power. Vin = 42 V: Imax = 42.9 A Vin = 48 V: Imax = 37.5 A Vin = 53 V: Imax = 34.0 A 8. `E' option clearance is required to maintain `Basic' creepage and clearance requirements when minimally insulated conductor paths are placed directly underneath the converter. 9. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 10. NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http://www.powerconversion.com to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev.06.06.08 qb2gibc 3 of 4 Mechanical Drawing 2.30 (58.4) 2.000 (50.80) 0.1450.020 (3.680.51) 0.40(10.2) 0.300 (7.62) 0.300 (7.62) 1 2 3 4 5 0.188(4.78) 1.45 (36.8) o0.0400.002 (1.020.05) (3 pls) 0.0170.015 (0.430.38) o0.0620.002 (1.570.05) (2 pls) 'A' Option 0.725 (18.4) 2.30 (58.4) 2.000 (50.80) 0.1450.020 (3.680.51) 1.45 (36.8) 0.300 (7.62) 0.300 (7.62) 1 2 3 5 0.188(4.78) 4 o0.0400.002 (1.020.05) (3 pls) 0.0700.015 (1.780.38) 0.45(11.4) o0.0620.002 (1.570.05) (2 pls) 0.725 (18.4) o0.0580.008 (o1.470.20) (3 PLS) REF IPC-2222 Level B o0.0800.008 (o2.030.20) (2 pls) REF IPC-2222 Level B 'E' Option (See Note 8) RECOMMENDED HOLE PATTERN Dimensions in Inches (mm) Tolerances (unless otherwise specified) x.xx 0.02 (x.x 0.5) x.xxx 0.010 (x.xx 0.25) Pin connections Pin Number Function 1 2 3 4 5 +Vin Remote ON/OFF -Vin -Vout +Vout Embedded Power for Business-Critical Continuity Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 (760) 930 4600 Facsimile: +1 (760) 930 0698 Rev.06.06.08 qb2gibc 4 of 4 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2008 Emerson Electric Co. |
Price & Availability of IBC30AQS4812J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |